Mistakes To Avoid When Repairing Hydraulic Cylinders

If you have a vehicle and like to take a shot at whatever the problem is when your vehicle breaks down before taking it to a service shop, you might be stymied by the hydraulic cylinder. It is relatively easy to make some mistakes when trying to troubleshoot and repair your hydraulic cylinder. In some situations, making a mistake with your hydraulic cylinder can lead to more costly repairs down the line. Here are some common mistakes that people make when trying to repair their hydraulic cylinders and how to avoid them.

1. You Don't Perform a More Thorough Check Even Though You Have to Replace Seals Regularly

The main sign that something is wrong is if your cylinders' seals are missing on a regular basis. You keep replacing them and they keep going missing but you don't investigate further. This is a huge mistake because something is definitely causing those seals to fly off and it's critical that you discover what it is while you have a disassembled cylinder in front of you. Check the cylinder for bulges if you lose a piston seal regularly, and replace the cylinder's body. If you always have your rod seals disappearing, make sure that you check that the rod is straight. Don't run you vehicle with either of these problems or you could risk engine damage.

2. Don't Use the Wrong Screwdriver

The next thing that you have to do is avoid using the wrong screwdriver. You want to use a screwdriver that precisely matches the screw that you're trying to take out or put in. The reason for this is that if you use a screwdriver that is too large, you might not pay attention enough and accidentally nick the seal that you have just installed or are starting to install. A seal with a tiny hole in it is not going to be effective as a seal and will result in any efforts that you have already put into the repair being utterly useless.

3. Measure Seal Grooves, Not Old Seals

When you have to order new seals for your car, make sure that you are measuring the seal grooves for the size of seal that you need, rather than old seals. The reason for this is that old seals tend to stretch out over time and will change their shape, leading to their measurements being inaccurate for the type of seal that you will need in the future.

For more information, talk to a company that specializes in repairing hydraulic cylinders, such as Hurst Hydraulics.

Share